23
You can execute this command multiple times, but only the most recent configuration takes effect. To
view the current shortcut key definition, use the
display current-configuration
command.
This command is available in both user line view and user line class view. A non-default setting in
either view takes precedence over a default setting in the other view. A non-default setting in user
line view takes precedence over a non-default setting in user line class view.
Examples
# Define character
a
as the shortcut key for terminating a task.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] escape-key a
To verify the configuration:
1.
Ping IP address 192.168.1.49, specifying the
-c
keyword to set the number of ICMP echo
request packets to 20.
<Sysname> ping -c 20 192.168.1.49
PING 192.168.1.49: 56 data bytes, press a to break
Reply from 192.168.1.49: bytes=56 Sequence=1 ttl=255 time=3 ms
Reply from 192.168.1.49: bytes=56 Sequence=2 ttl=255 time=3 ms
2.
Press
a
.
The task is terminated, and the system returns to user view.
--- 192.168.1.49 ping statistics ---
2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
<Sysname>
flow-control
Use
flow-control
to configure the flow control mode.
Use
undo flow-control
to restore the default.
Syntax
flow-control
{
hardware
|
none
|
software
}
undo flow-control
Default
The flow control mode is
none
.
Views
User line view
Predefined user roles
network-admin
Parameters
hardware
: Performs hardware flow control.
none
: Disables flow control.
software
: Performs software flow control.