138
Syntax
backup startup-configuration to
tftp-server
[
dest-filename
]
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server
: Specifies a TFTP server by its IPv4 address or host name. The host name is a
case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
dest-filename
: Specifies the target file name used for saving the file on the server. The file name
must use the .cfg extension. If you do not specify a target file name, the source file name is used.
Usage guidelines
This command is not supported in FIPS mode.
Examples
# Back up the main next-startup configuration file to the TFTP server at 2.2.2.2, and set the target file
name to
192-168-1-26.cfg
.
<Sysname> backup startup-configuration to 2.2.2.2 192-168-1-26.cfg
Backup next startup-configuration file to 2.2.2.2, please wait…finished
Related commands
restore startup-configuration
configuration commit
Use
configuration commit
to commit the settings configured after the
configuration commit
delay
command was executed.
Syntax
configuration commit
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must execute the
configuration commit delay
command before executing this command.
As a best practice, enable the information center and configure the information center to output logs
to the console. Determine whether to commit the settings depending on the logs. For more
information about the information center, see
Network Management and Monitoring Configuration
Guide
.
Examples
# Set the allowed delay time to 10 minutes for a manual commit to keep the settings configured
subsequently in effect.
<Sysname> system-view
[Sysname] configuration commit delay 10