manualshive.com logo in svg

H3C S5830V2 series, Command Reference Manual, Page: 145 / 301

Share
Download
H3C S5830V2 series Command Reference Manual Download Page 145

 

133 

Related commands 

mount

 

undelete 

Use 

undelete

 to restore a file from the recycle bin. 

Syntax 

undelete

 

file

-

url

 

Views 

User view 

Predefined user roles 

network-admin 

Parameters 

file-url

: Specifies the name of the file to be restored. 

Usage guidelines 

If a file with the same name already exists in the directory, the system prompts whether or not you 
want to overwrite the existing file. If you enter 

Y

, the existing file is overwritten. If you enter 

N

, the 

command is not executed.

 

Examples 

# Restore the 

copy.cfg

 file, which was moved from the 

flash:

 directory to the recycle bin. 

<Sysname>undelete copy.cfg 

Undelete flash:/copy.cfg?[Y/N]:y 

Undeleting file flash:/copy.cfg... Done. 

# Restore the 

startup.cfg

 file, which was moved from the 

flash:/seclog

 directory to the recycle bin. 

•

 

Method 1: 

<Sysname>undelete seclog/startup.cfg 

Undelete flash:/seclog/startup.cfg?[Y/N]:y 

Undeleting file flash:/seclog/startup.cfg... Done. 

<Sysname> 

•

 

Method 2: 

<Sysname> cd seclog 

<Sysname> undelete startup.cfg 

Undelete flash:/seclog/startup.cfg?[Y/N]:y 

Undeleting file flash:/seclog/startup.cfg... Done. 

Summary of Contents for S5830V2 series














































































































































































































































































































Reviews:

No comments