manualshive.com logo in svg

H3C S5830V2 series, Command Reference Manual, Page: 179 / 301

Share
Download
H3C S5830V2 series Command Reference Manual Download Page 179

 

167 

 Service name: system 

 Platform version: 7.1.022 

 Product version: Test 2201 

 Supported board: mpu 

[Component] 

 Component: system 

 Description: system package 

Table 23 Command output 

Field Description 

Active packages on slot 

n

 

Active software images on the specified member. The argument 

n

 indicates 

the member ID of the member. 

[Package] 

Detailed information about the software image. 

Service name 

Image type: 

•

 

boot

—Boot image. 

•

 

system

—System image. 

•

 

system-patch

—Patch image for the system image. 

•

 

boot-patch

—Patch image for the boot image. 

•

 

Any other value indicates a feature image. 

Supported board 

Cards supported by the software image. The 

mpu

 string indicates a 

member device. 

[Component] 

Information about components included in the image file. 

 

Related commands 

install active 

display install backup 

Use 

display install backup

 to display backup startup software images.

 

Syntax 

display install backup

 [ 

slot

 

slot-number 

] [ 

verbose

 ] 

Views 

Any view 

Predefined user roles 

network-admin 

network-operator 

Parameters

 

slot

 

slot-number

: Specifies an IRF member device by its member ID or specifies a PEX that has 

storage media by its virtual slot number. On an IRF fabric, this command displays information for all 
member devices if you do not specify a member device. On an IRF 3 system, this command displays 
information for all parent devices and all PEXs with storage media if you do not specify a parent 
device or PEX.

 

verbose

: Displays detailed information. If you do not specify this keyword, the command displays 

only the names of the software images. 

Summary of Contents for S5830V2 series














































































































































































































































































































Reviews:

No comments