H3C S5830V2 series Command Reference Manual Download Page 177

Page: 177 / 301

165

<Sysname> warm-reboot file feature flash:/feature.bin

This operation will delete the rollback point information for the previous upgrade and

maybe get unsaved configuration lost. Continue? [Y/N]:Y

Upgrade summary according to following table:

flash:/feature.bin

Running Version New Version

Alpha 7122 Alpha 7123

Slot Upgrade Way

1 Warm Reboot

Upgrading software images to compatible versions. Continue? [Y/N]:y

Table 22 Command output

Field Description

Running Version

Version of the current software images.

New Version

Version of the upgrade software images.

Slot

Device ID. It is fixed at 1.

Summary of Contents for S5830V2 series














































































































































































































































































































Search results

Summary of Contents for S5830V2 series

Reviews:

H3C S5830V2 series, Command Reference Manual, Page: 177 / 301

Search results

Summary of Contents for S5830V2 series

Reviews: