manualshive.com logo in svg

H3C S5830V2 series, Command Reference Manual, Page: 292 / 301

Share
Download
H3C S5830V2 series Command Reference Manual Download Page 292

 

280 

License management commands 

display license

 

Use 

display license

 to display detailed license information. 

Syntax 

display license 

[

 activation-file 

] [ 

slot

 

slot-number 

]

 

Views 

Any view 

Predefined user roles 

network-admin 

network-operator 

Parameters

 

activation-file

: Displays information about activation files.

 

slot

 slot-number

: Specifies the member ID of an IRF member device. If no member device is 

specified, this command displays license information for all IRF member devices.  

Usage guidelines 

The 

display license

 command displays detailed information about all licenses if it is used without any 

keywords. 

Examples 

# Display detailed license information for each IRF member device.  

<Sysname> display license 

Slot 1: 

flash:/license/210235A0U0H12A0000652013093013451765317.ak 

Feature: evi SPBM EVB FCoE TRILL 

Product Description: H3C S5820V2 Data Center License 

Registered at: 2014-01-01 04:53:49 

License Type: Permanent 

Current State: In use 

Table 50 

Command output

 

Field Description 

Slot 

n

 

Member ID of the IRF member device. 

Feature 

Feature name. 

Switches of this series do not support the EVI feature in the current software version.

Registered at 

Time when the license was installed. 

License Type 

License type by validity period:  

•

 

NA

—The system cannot obtain the license type. 

•

 

Permanent

—Purchased license that never expires and is always valid. 

•

 

Days restricted

—Purchased license that is valid for a period in days, for 

example, 30 days. 

•

 

Trial (days restricted)

—Free trial license that is valid for a period in days.  

Summary of Contents for S5830V2 series














































































































































































































































































































Reviews:

No comments