31
Figure 24
Installing the LPU
(1) Push the LPU into the slot until the brakes touch the slot edges tightly
(2) Press the ejector levers inward
(3) Fasten the captive screws on the LPU
Installing switching fabric modules
CAUTION:
•
You must install a minimum of one switching fabric module for the switch.
•
When you use the LSXM1TGS24FX1 LPU on the switch, first install the switching fabric modules in the
first three switching fabric module slots (from top to bottom or from left to right).
The switch has six switching fabric module slots.
1
2
2
3
3
Summary of Contents for S12500-X
Page 35: ...26 Figure 20 Grounding the switch through the RTN wire of the DC power module...
Page 80: ...71 Figure 51 Replacing an LPU 1 1 Loosen the captive screw 2 Pull the ejector levers outward...
Page 138: ...129 Figure 75 CXP fiber cable 1 Connector 2 Pull latch 1 2...
Page 152: ...143 Figure 91 Cable routing from the left side for an S12510 X AC S12510 X DC switch...
