72
Figure 52
Replacing an LPU (2)
Replacing a switching fabric module
1.
Prepare an antistatic mat to place the removed switching fabric module.
2.
Wear an ESD wrist strap, and make sure it makes good skin contact and is reliably grounded. For
more information, see "
3.
Use a Phillips screwdriver to loosen the captive screws on the switching fabric module, as shown
in callout 1 on
.
4.
Press the buttons on the ejector levers to release them and then move the ejector levers outward to
separate the switching fabric module from the backplane, as shown in callout 2 on
Summary of Contents for S12500-X
Page 35: ...26 Figure 20 Grounding the switch through the RTN wire of the DC power module...
Page 80: ...71 Figure 51 Replacing an LPU 1 1 Loosen the captive screw 2 Pull the ejector levers outward...
Page 138: ...129 Figure 75 CXP fiber cable 1 Connector 2 Pull latch 1 2...
Page 152: ...143 Figure 91 Cable routing from the left side for an S12510 X AC S12510 X DC switch...
