H3C S12500-X, Installation Manual

Page: 105 / 168

96
Type A and type B MPU specifications
Table 28 Type A and type B MPU specifications
Item Description
Interfaces
•
One console port
•
One 10/100/1000BASE-T interface for management and upgrade
•
One USB port (USB2.0, host port)
Interface transmission
rate
•
Console port: 9600 bps (default) to 115200 bps
•
10/100/1000BASE-T interface: 10/100/1000 Mbps
Cables and max
transmission distance
•
Console port: 15 m (49.21 ft) over common asynchronous serial interface cable
•
10/100/1000BASE-T interface: 100 m (328.08 ft) over category-5 twisted pairs
NOTE:
The USB port on the MPU is a USB 2.0 port. This port provides connection to the USB 2.0-compliant
device only.
LPUs
You can only install the MPU and LPU that are compatible with each other. Table 29 and Table 30 list
LPUs that are compatible with type A MPUs and type B MPUs, respectively.
NOTE:
•
The model of a card is LSXM-prefixed on the card package and LSX-prefixed or LSXM-prefixed on the
card panel. For example, LSX1TGS48EA1 and LSXM1TGS48EA1 identify the same card. When you
order a card, refer to the card by its LSXM-prefixed model.
• For more information about the transceiver modules that each LPU supports, see " Transceiver
modules ."
LPUs compatible with type A MPUs
Table 29 Type A MPU-compatible LPU specifications
LPU model Description Connector
Port
quantity
Port speed
Available transceiver
modules
LSX1TGS48EA1
48-port
10-Gigabit
SFP+ fiber
Ethernet
interface card
LC 48 10/1 Gbps
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+
copper cable
•
Gigabit SFP module
LSXM1TGS16EA1
16-port
10-Gigabit
SFP+ fiber
Ethernet
interface card
LC 16 10/1 Gbps
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+
copper cable
•
Gigabit SFP module