![background image](http://html.mh-extra.com/html/h-p-cosmos/arsalis-gaitway-3d/arsalis-gaitway-3d_service-manual_574521086.webp)
gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 82
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
16.
Connect the Ethernet cable from the
gaitway-3D force amplifier to one router LAN
port (if a router is used) or to the operator
computer (if a direct connection is used).
Ethernet cable
17.
Connect the mains plug of the system.
1.
Perform calibration procedure.
18.
Perform on-site checkout procedure.
19.
Re-connect
any
connector
caps
7 to the amplifier.
20.
Connect, if applicable, the other cables of
the setup disconnected in step
END OF PROCEDURE