![background image](http://html.mh-extra.com/html/h-p-cosmos/arsalis-gaitway-3d/arsalis-gaitway-3d_service-manual_574521026.webp)
gaitway-3D Service manual
Ref.:TM-MAN-0005-ARS
Iss.: A
Rev.: 9
Date: 07/12/2020
Page : 22
Test Step
Measurements/Test Results
Seq.
No.
Description
Required/No
minal (incl.
tolerance)
Measured/
Calculated
Remarks/Calculations
Pass/
No
pass
11.
While
the
treadmill
is
elevated
and
supported two wheel boards, place the two
treadmill-supports
under
the
treadmill.
Sensors 1 and 4 shall be placed at the left
side of the treadmill; sensors 2 and 3 shall
be placed at the right side of the treadmill.
Load cells are identified by the label at the
end of the cable.
Sensors 1&4:
LEFT side
Sensors 2&3:
RIGHT side
Sensors 1&4:
Sensors 2&3:
12.
Lift the supports and insert screws to
suspend them to the treadmill. Use the M8
screws and their washers. Tighten them to
fix the supports to the treadmill beams. Use
a short 13mm hexa bit.
Torque =
15Nm