6
TLC 2100
271-0498-4852503#
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video
product, safety is a major factor in the design of every instrument. But safety is your responsi-
bility, too.
These pages list important information that will help to assure proper use of a Video Cassette
Recorder and accessory equipment. Please read it carefully before operating your video product
and keep it in a handy place for future reference.
1
. USE HIGH QUALITY HIGH GRADE VHS CASSETTES - High resolution time
lapse recording requires a high quality high grade tape for satisfactory perfor-
mance. Some brands of tape can have an adverse effect on video head performance
and head life. The following brands have been found to meet our critical specifica-
tions:
GYYR BASF MAXELL TDK
2. READ INSTRUCTIONS
- All of the safety and operating instructions should be
read before the appliance is operated.
3. RETAIN INSTRUCTIONS-
The safety and operating instructions should be re-
tained for future reference.
4. HEED WARNINGS
-All warnings on the appliance and in the operating instruc-
tions should be adhered to.
5. FOLLOW INSTRUCTIONS
-All of the “operating and use” instructions should be
adhered to.
6. GROUNDING
-This video product is equipped with a 3-wire grounding- type plug
[A plug having a third pin for grounding.] This plug will only fit into a grounding-
type power outlet. This is a safety feature. If you are unable to insert the plug into
your outlet, contact your electrician to replace your obsolete outlet. Do not attempt
to defeat the safety purpose of the grounding-type plug.
7.
POWER SOURCES-This video product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type of power
you are using, consult your video dealer or local power company.
8.
OVERLOADING-Do not overload wall units and extension cords, as this can result
in a risk of fire or electric shock. Frayed power cords, damaged or cracked wire
insulation and broken plugs are dangerous. Periodically examine the cord and
have it replaced by your service technician if appearance indicates damage or
deteriorated insulation.
9.
POWER-PLUG PROTECTION-The power-supply cords should be routed so they
are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at the plug, convenience receptacles, and the point
where the cord exits from the video product.
10.VENTILATION
-Slots and opening in the cabinet are provided for ventilation and
to ensure reliable operation of the video product and to protect it from overheating.
Therefore, these openings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed, soft rug, or other similar
surface. This video product should not be placed in a built-in installation such as
bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been followed.
11.
ATTACHMENTS-Do not use attachments other than those specifically recom-
mended by the video product manufacturer as they may cause hazards.
CAUTION:
Maintain electrical safety. Powerline operated equipment or accesso-
ries connected to this unit should bear the UL listing mark or CSA certification mark
on the accessory itself and should not have been modified so as to defeat the safety
features. This will help avoid any potential hazard from electric shock or fire. If in
doubt, contact qualified service personnel.
