15
TLC 2100
271-0498-4852503#
Programming
Operation
Controls
18 PROG. (PROGRAM) BUTTON
Press to display Main Menu. Also used for various Menu functions. See "To Move
and Edit in the Menus" page 21 for more information about all the programming
control buttons.
19 PREV. (PREVIOUS) BUTTON
Press to go back to last displayed function or value.
20 NEXT BUTTON
Press to go to the next function or value to be displayed.
21 DOWN BUTTON
Press to change to a lower value or to move to next line in a menu.
22 UP BUTTON
Press to change to a higher value or to move to the previous line in a menu.
Position & Alarm
Controls
23 V-POS (VERTICAL POSITION) BUTTON
Press repeatedly to control the vertical position of the Time / Date display.
24 H-POS (HORIZONTAL POSITION) BUTTON
Press repeatedly to control the horizontal position of the Time / Date display
25 ALARM SEARCH INDEX BUTTON
Press to activate Alarm Search Index function. See "Alarm Index" for more
information.
26 ALARM RESET BUTTON
Press to clear all ALARM and POWER LOSS information.
The first press clears "PL" in the Time/Date stamp (if this condition exists).
The second press (first press if there is no Power Loss) clears the Alarm Memory
menu list (see page 27 for more information).
Note: V-POS and H-POS
operate independently
of the Text Position
settings in the Display
Options submenu. It is
possible that the POS
and Display Options
settings may conflict
with each other. See
"Display Options
Submenu" for further
information.
Note also that the Text
Position setting allow
you to set the individual
positions of the Date,
Time, and System Code
lines, whereas V-POS
and H-POS move these
three lines as a group.
1* 1( 2) 2! 2@
2# 2$ 2% 2^
