SECTION 4 GENERAL INFORMATION
Gyrus ACMI PlasmaKinetic SuperPulse Generator
USER MANUAL
Part Number: 144012-MB
Page 4-11
Fig 4.14
Re-enter the PIN code using the same procedure, once this is correctly displayed
press the
Mode / Menu button, the Superpulse generator will bleep to acknowledge
the PIN entry.
If the code is entered incorrectly then the following display will be shown
Fig 4.15
The PIN entry sequence must then be repeated, press any arrow button to restart the
PIN entry sequence.
Note: If the PIN Entry screen is left displayed for two minutes at any time without any
buttons being pressed the Superpulse will return to its default screen “Connect PK
Cable” or “Insert Device” and the PIN entry process will have failed and will need to
be repeated.
b) With Instrument available at time of PIN entry.
This allows the instrument to be enabled at the start of the surgery if it has not been
done previously. Insert the instrument, if the following display is shown on the VFD,
Fig 4.16
then the PIN code must be entered as detailed previously in section 4F, however no
timeout will occur when the instrument is connected.
Confirm Pin Code
_
< >
Invalid Pin code
< >
Enter Pin Code
To enable Instrument
_
< >
SECTION 4
GENERAL INFORMATION
Summary of Contents for PlasmaKinetic SuperPulse
Page 2: ......
