SECTION 4 GENERAL INFORMATION
Gyrus ACMI PlasmaKinetic SuperPulse Generator
USER MANUAL
Part Number: 144012-MB
Page 4-9
4D.
CHANGING THE DISPLAY LANGUAGE
From the Superpulse generator Idle state (with the VFD screen showing the “Connect PK
Cable” or “X Way Cable Attached Insert Device” message) press and hold for 3 seconds
the Mode / Menu button on the Superpulse front panel.
The Superpulse generator VFD screen will show the “Display Intensity” message, press
and release the Mode / Menu button twice so the following screen is displayed.
Fig 4.12
Use the right hand arrow buttons to change the language as required. Press and hold the
Mode / Menu button down to return to the previous state.
Once the language has been changed from the factory default of English, the Superpulse
will continue to use the selected language for all instructions, performance information
and error messages on the generator VFD display.
Select Language
English
SECTION 4
GENERAL INFORMATION
Summary of Contents for PlasmaKinetic SuperPulse
Page 2: ......
