80834 REV ED
15
CyberWand Dual Ultrasonic Lithotripsy System • Instructions for Use
EN
EN
Section 9.0 Disposal of Waste Electrical Equipment
It is the sole responsibility of the user/user facility to properly dispose of equipment in a safe manner
consistent with all compliance guidelines, applicable policies and procedures, statutes, and regulations
that govern waste electrical equipment discarded by their facility in conjunction with all applicable
local, city, county, town, state, or country specific codes for waste management.
The safe disposal of waste electrical equipment should be undertaken only at the end of the
equipment’s useful life (i.e., the device is nonfunctional & nonrepairable), and should be undertaken in
an environmentally conscious manner minimizing environmental impact.
It is the sole responsibility of the user/user facility to determine whether waste electrical equipment
should be collected and disposed separately from or together with unsorted municipal waste.
Public or private solid waste collection and disposal facilities that offer various forms of recovery
(dismantling, reuse, and recycling, where possible) should be selected reducing the amount of waste
being discarded and providing the highest level of protection for human health and the environment.
It is the sole responsibility of the user/user facility to determine the conditions under which the waste
electrical equipment is to be collected, noting that items contaminated by the user may require
confirmed decontamination by means of the best available treatment options.
Section 10.0 Repair
This product does not contain any user serviceable parts. Do not disassemble, modify or attempt to
repair it; patient or user injury and/or equipment damage can result.
Some problems that appear to be malfunctions may be correctable by referring to Section 8.0
Troubleshooting.
A technical manual is available upon request for Biomedical Technicians.
NOTE: Do not open transducer or generator systems. A technical manual is to help in troubleshooting
the problems or to help in the diagnosis if the part or system is returned for repairs.
