DIGITAL I/O
89
Timing Diagram
Low limit
High limit
P
P
P
EOM
H
L
Pin 3
PASS
Pin 4
EOM
Pin 1
HIGH FAIL
Pin 2
LOW FAIL
Pin 1-4
Output
Compare On
Compare Off
User Mode
User mode can only used when using a remote control interface.
Likewise this mode can only be enabled or disabled via remote
control. Please see the digital I/O commands on page 131 for full
usage details.
Related
Commands
DIGitalio:MODE {USER|NORM|?}
DIGitalio{X}:SETup {ON|OFF}
Procedure
1.
Connect to the GDM-8352 remotely, see page 91
for remote control options.
2.
Enable the user mode using the
DIGitalio:MODE command. See page 131.
3.
Set the state of pins 1 ~ 4 using the
DIGitalio{X}:SETup command. See page 131.
