OPERATION
55
Dual Measurement Overview
The dual measurement mode allows you to use the 2nd display to
show another item, thus allowing you to view two different
measurement results on the screen.
When the multimeter is used in dual measurement mode, both
displays are updated from either a single measurement or from two
separate measurements. If the primary and secondary
measurement modes have the same range, rate and rely on the
same fundamental measurement, then a single measurement is
taken for both displays; such as ACV and frequency/period
measurements. If the primary and secondary displays use different
measurement functions, ranges or rates, then separate
measurements will be taken for each display. For example, ACV
and DCV measurements.
Most of the basic measurement functions, except for
resistance/continuity can be used in the dual measurement mode.
Supported Dual Measurement Modes
The following table lists all the measurement functions that are
supported with the dual measurement function.
Supported Dual
Measurement
modes
Primary
Display
Secondary Display
ACV DCV ACI
DCI Hz/P
Ω
ACV
●
●
●
●
●
X
DCV
●
●
●
●
X
X
ACI
●
●
●
●
●
X
DCI
●
●
●
●
X
X
Hz/P
●
X
●
X
●
X
Ω
X
X
X
X
X
●
