Günter & Hauer
7
ELECTRICAL CONNECTION
For operation of this gas hob it is necessary to provide power supply from a single-phase
electric network with voltage of 220 ~ 230 V. Connection has to be executed according
to norms and according to current legislation. Before connecting, make sure that:
• the electrical network has a proper grounding in accordance with current regulations;
• After installing the appliance, easy access to the mains socket or multi-pole switch is
provided.
The hob is completed with a power cord and a plug. Connect it to a suitable grounded
socket.
If the appliance is permanently connected to the
mains, it is necessary to install a multipole
switch between them with a distance between
open contacts of at least 3 mm, the type of which
according to the current rules corresponds to the
required load.
The switch must not open yellow / green
grounding cable. The brown phase cable
(coming from terminal "L" of the terminal
block) must be connected to the phase of the
power supply network.
The mains cord must be placed in such a way
that no part of it can be heated above 75 ° C.
An example of the optimal cord laying is shown
in the figure on the left. When laying the cord,
secure it to the side of the furniture with clamps
to avoid contact with the equipment installed
under the hob.
L (phase) – brown
cabel
N (zero) – blue cabel
C – power cord
BACK VIEW
FRONT VIEW
clamps
Working
hole in
the
furniture
Rigid copper pipe or
stainless-steel hose
