Günter & Hauer
5
BURNER DESIGN
1 – Burner Cap
2 – Burner splitter
3 – Splitter Body
4 – Ignition spark
5 – Gas control Thermoelement
Do not try to turn the control knob without pressing it, as this may cause the gas valve
to fail.
In the absence of power supply, the ignition of the burner can be performed without
an electrical device; in this case, raise the fire to the burner, press the corresponding
knob and turn it counterclockwise to the maximum position.
When the power supply is applied after the hob is installed or switched off, it is
normal for the spark plug to fire automatically.
Do not hold the control knob for more than 15 seconds. If the burner does not light
up even after 15 seconds, release the control knob, turn it to the "
OFF
" position and
wait at least one minute before attempting to turn the burner back on.
Standard burner
SABAF Triple Burner
SABAF Triple Burner
