Günter & Hauer
4
USE OF GAS HOB
On the front of the panel there are handles for controlling gas burners. The symbols
depicted next to the handles indicate their correspondence to certain burners.
All built-in gas hobs, except for automatic electric ignition, are equipped with a special
protective function "gas control". If for any reason the burner flame goes out, the gas
supply will be stopped.
The feature requires simple actions taken by the user when setting fire to the burners,
namely:
Press the corresponding knob of the burner and turn it counterclockwise to the "
Max.
heat
" symbol.
This position also corresponds to the “
Ignition
” symbol. When you press the control
knob in this position, sparks are formed - the ignition will happen automatically.
After the flame appears, hold the handle for 5-8 seconds. This will allow the
thermocouple to heat up and switch off the safety device. Otherwise the gas supply will
be interrupted.
Make sure the flame is stable and adjust it to the desired level.
If several attempts to ignite the burner fail, check the burner cover and splitter to see if
they are in the correct position. To extinguish the flame, turn the knob clockwise all the
way to the "
OFF
" position (•).
ON/OFF
Max. Heat
Min. Heat
Ignition
Burner Place
