Page 59
Issue 07/2011
Operation
Permissible operating conditions
Important
Before installing and using the power generation system,
please read the operating manual fully and carefully.
Only use the generator and the switch cabinet for the
uses listed in the sections on “intended use” and only in
accordance with the information in the operating manuals.
5.2
Permissible operating conditions
Only use the generator and the switch cabinet when the following operating
conditions have been met.
y
Only connect devices whose voltage and frequency data in the rating
plate match the information on the type plate of the power generation
system.
y
Do not overload the power generation system. The total power draw of
all connected units must not exceed the output indicated for the current
power generation system.
y
The power generation system must have an unobstructed flow of cooling
air and an unhindered cooling air discharge.
y
The temperature of cooling air should not exceed 40 °C. If the cooling
conditions are not met, do not the generator up to its full nominal output.
y
If the generator is not sufficiently cooled, or in conditions which deviate
from the permissible operating conditions, the output voltage of the
generator will be reduced automatically. To prevent damage to connected
devices, in this case it will be necessary to reduce the output connected to
the generator
Summary of Contents for DWG (BL) 13/7-2 ZE
Page 87: ...Page 87 Issue 07 2011...
