GTS DWG (BL) 13/7-2 ZE, Installation And Operating Manual

Page: 46 / 88

Issue 07/2011 Page 46
Bu
ilt
-in g
en
er
at
or
s w
ith s
w
itch c
ab
in
et f
or p
er
m
an
en
tly i
ns
ta
lle
d p
ow
er g
en
er
at
io
n s
ys
te
m
s ≥ 1
2 k
VA i
n fi
re e
ng
in
es
Installation of generator
Installation of generators of model 160
Assembly
>
Place the flange (Figure 9 [1] ) onto the generator and secure with four
screws [2a] .
>
Place a toothed washer [2b] underneath the screws and secure with
Loctite.
>
Mount the first half of the coupling [3] on the shaft at the generator and
prevent it from twisting on the shaft using with a key.
>
Mount the washer [4] onto the hydraulic motor [6] .
>
Place the second half of the coupling [3] to the hydraulic motor.
>
Place the hydraulic motor [6] with washer [4] and the second half of the
coupling on the generator.
>
Where necessary, turn the coupling slightly to ensure the gearing locks.
>
Place toothed washers [5b] to eight screws [5a] and secure disk [4] to the
flange [1] .
>
Place the collar [7] onto the coupling unit and tighten firmly with two
screws.
1
4x
8x
5a
5b
3
4
6
7
2x
2a
2b
Figure 9 Assembly of flange mount hydraulic drive
(generator model 160)
2a M12 x 35 DIN 912
2b VH 12 DIN 128
5a M8 x 30 DIN 912
5b VH 8 DIN 128