GTS DWG (BL) 13/7-2 ZE, Installation And Operating Manual

Page: 39 / 88

Page 39 Issue 07/2011
Installation of generator
Installation of generators of model 132
>
Mount the washer [6] onto the hydraulic motor [8] .
>
Place the second half of the coupling [5] to the hydraulic motor.
>
Place the hydraulic motor [8] with washer [6] and the second half of the
coupling on the generator.
>
Where necessary, turn the coupling slightly to ensure the gearing locks.
>
Place toothed washers [7b] to eight screws [7a] and secure disk [6] to the
flange [2] .
>
Place the collar [9] onto the coupling unit and tighten firmly with two
screws.
1
4x
3b
3a
4x
8x
7a
7b 2
5
6
8
9
2x
2x
4a
4b
Figure 7 Assembly of flange mount hydraulic drive (generator model 132)
3a M8 DIN 985
3b A8 DIN 125
4a M8 x 45 DIN 912
4b VH 8 DIN 128
7a M8 x 20 DIN 912
7b VH 8 DIN 128