Page 53
Issue 07/2011
Installation of switch cabinet and electrical connection
Electrical connection
4.5
Electrical connection
Prior to connection of the switch cabinet to the generator, read the safety
instructions in section 4.1 and the connection instructions in this section
4.5 attentively and follow the instructions and information therein. Also note
the instructions and requirements of the switch cabinet.
4.5.1
Instructions, laying of cables
When laying lines and cables, follow these instructions:
y
Pay attention to the specified cross-sections. Dimension the lines
sufficiently, based on the nominal current of the generator.
y
It is crucial that you keep to the minimum bending radii specified by the
cable manufacturer.
y
Avoid abrasions on the cables, especially in the bending area of the cables.
Summary of Contents for DWG (BL) 13/7-2 ZE
Page 87: ...Page 87 Issue 07 2011...
