GTCO CalComp Super L VI Series, User Manual

Page: 32 / 48

Super L VI 32
4. The Tablet Configuration Utilities will begin searching the Serial Ports for a supported
tablet.
a. If the tablet is found, information about the tablet will display under Device
Info near the bottom of the screen.
b. If the tablet is not found, a message will appear under Device Info near the
bottom of the screen.
i. If Wintab files were found, it is possible that the TabletWorks driver has
the Serial Port open.
ii. If the Serial Port is open by another application, it will not be displayed
under System Info. Close any application or uninstall any driver that is
using the Serial Port and select
Refresh System Info
from the File
dropdown list at the top of the screen. Click on the Serial Port icon under
System Info to search that Serial Port.
NOTE: The Tablet Configuration Utilities can use the TabletWorks driver to test the tablet, but
it must be communicating directly with the tablet, via the Serial Port, in order to configure it.
5. Once the Super L VI has been found on a Serial Port, select
Advanced Configuration
from the Options dropdown list at the top of the screen.
a. If Advanced Configuration is not an option, make sure
Wintab Compatible Driver
is not listed under Device Info.
6. Select a predefined through , SuperSet Code, or select one of the
User Defined through , SuperSet Codes to customize.
a. User Defined ( through ) SuperSet Codes are initially read
from the tablet when the Advanced Configuration screen opens. This is to
prevent loss of custom settings. Selecting Read Current Settings from the
Options menu will:
i. Read the Power-Up settings and User Defined SuperSet Codes from the
tablet.
ii. Overwrite all Custom Settings not yet saved to the tablet.
b. Restore Factory Settings from the Options menu will prompt for:
i. Power-Up settings reset to factory default and set current.
ii. User Defined SuperSet Codes cleared and reset to factory default.
7. After making your selections, choose one of the following from the File menu at the top
of the screen.
a. Save Temporary Settings will configure the tablet as shown until the tablet is
powered off, reset or another SuperSet Code is selected.
i. After saving temporary settings, select File/Exit to test with other
applications. This will leave the tablet configured to the temporary