GTCO CalComp Super L VI Series, User Manual

Page: 13 / 48

Super L VI 13
To turn the alarm Off or On:
 Click on the button to toggle the tones Off or On.
Testing the Active Area
To test the Super L VI grid, or Active Area:
1. Using the transducer, click on the button to activate the test.
2. Move the transducer around in the Active Area. If there is a break in the grid or the
transducer is out of prox, the tablet will beep.
3. Click the button again to end the test.
NOTE: The following is relevant only when connecting via an RS-232 serial installation. USB
does not require configuration.
Configuring Super L VI for Specific Applications
To configure your Super L VI for use with specific applications:
1. In Table 1, find the application program you will be using with your Super L VI. Note
the corresponding SuperSet Code.
 If your application program is not listed in Table 1, find the configuration settings
in Table 2 that your application program requires and use the corresponding
SuperSet Code.
 If an appropriate SuperSet Code is not listed in Table 2, then use the Tablet
Configuration Utilities to configure your Super L VI.
2. On the SuperSet Menu, click on the button, and then click on the two digits of the
SuperSet Code indicated for your application.
You will hear four short tones after a successful menu configuration.