GTCO CalComp Super L VI Series, User Manual

Page: 11 / 48

Super L VI 11
Tablet Power On
The Super L VI power switch is located at the rear of the tablet on the Connector Panel. When
turned on, the Super L VI’s Indicator Light will begin blinking and four
Success
tones will sound.
If you are using a cordless transducer, turn it on by pressing any button on pen/cursor. The
Indicator Light will glow steadily when the transducer is inside the Active Area of the tablet.
When the transducer moves outside the Active Area, the Indicator Light will go off.
Using the SuperSet Menu (RS-232 Only)
The SuperSet Menu is the row of buttons printed across the top of the digitizer. It allows you
to configure Super L VI to send the appropriate information through an RS-232 serial
connection to the software being used on the computer.
The SuperSet Menu is used to prepare the digitizer to receive specific, detailed custom
configuration information from the Tablet Configuration Utilities for some serial installations.
Use your transducer (pen or cursor) to click on the menu buttons to make your selections.
In addition, for both serial and USB connections, the SuperSet Menu can be used to reset the
Super L VI, turn the digitizer alarm OFF or ON, and test the grid or
Active Area
.