GTCO CalComp Super L VI Series, User Manual

Page: 5 / 48

Super L VI 5
If for some reason, the communication requirements for your software cannot be found in the
two tables provided in the SuperSet Menu section, Tablet Configuration Utilities (visit our
Website gtcocalcomp.com) can be used to configure your Super L VI so it has the appropriate
information it needs to communicate successfully with your software.
Parts Checklist

Super L VI digitizing tablet

Transducer (corded or cordless pen,
4-button or 16-button cursor)
 USB cable

Warranty Sheet
Optional Equipment

RS-232 with 9-pin connector for serial
connection

Power supply – required only for a
serial installation

Universal mounting brackets

Table feet

Accessory tray

Plan holder
What You Will Need to Use the Super L VI
Super L VI is equipped with both a USB interface and an RS-232 serial interface, which requires
an optional RS-232 cable and power supply. It is compatible with most industry-standard PCs.
The TabletWorks driver by GTCO CalComp is the only software described in this manual.
TabletWorks supports Wintab and TabCon-compatible applications. If you are not sure which
drivers are required, please consult with your application vendor.
A USB connection requires the use of a TabletWorks driver, while a serial connection requires
the use of a TabletWorks driver and/or a custom application program. After installing the
TabletWorks software, the Super L VI will work with all Windows-based applications as a
mouse, in addition to working as a digitizer with Windows-based applications that are
specifically designed for use with digitizers.
PC Requirements
For a USB Installation
 Microsoft Windows 7,8 or 10
 One available USB port
 10 MB of free disk space
 Application software that accepts digitizer input via the Wintab API or TabCon API