GST GST100 Installation And Operation Manual Download Page 33 | Manualshive

Page: 33 / 48

GST GST100 Installation And Operation Manual Download Page 33

GST100 Intelligent Fire Alarm Control Panel
Installation and Operation Manual

Page 29

The following functions can be realized by reset:

(1) Clearing all current fire alarm and fault display;

(2) Resetting the status indication LED of loop controlled fire suppression equipment.

(3) Clearing the silenced status;

(4) Locking the keypad.

6.10 Unlocking and Locking the Keypad

6.10.1 Unlocking the Keypad

The keypad is locked by default when powered up. Certain functional keys (except

Browse

)

request a password and confirmation by pressing

Enter

before further operation.

6.10.2 Locking the Keypad

The FACP is designed to automatically lock the keypad. When there are alarm messages such

as fire, supervisory and fault being displayed or there is menu operation, the FACP will lock the

keypad if there is no operation in 90 seconds and no new message comes.

Note: After operations, the person on duty should make sure that the keypad is locked

in order to avoid unwanted operation.

«
...
31
32
33
34
35
...
»

Summary of Contents for GST100

















































Reviews:

No comments