GST100 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 8
port to
connect loop devices with the panel.
Display area
This part is used to indicate and display different status of the system, and enables
relative operations through keypad (browsing, setting, printing and etc).
3.2.2 Optional Units
GST-GMP-16 Printer
It is a built-in mini-printer. It can print all ASCII code characters with dot matrix printing.
Network board
The control panel provides a multi-functional communication port for networking GST
series fire alarm control panels and repeater panels via a 485 card.
3.3 Periphery Devices
3.3.1 A Series of Intelligent Fire Detectors
The FACP can connect with a series of GST fire detectors mounted in the protected area to
transmit messages to the FACP through Class A loop. Every detector has its own address
with which the FACP can supervise the information of alarm, fault, and normal status of the
detectors.
3.3.2 Manual Call Points
A series of GST manual call point can be connected to the loop of GST100. When fire is
confirmed manually, pressing the glass on the MCP, alarm signal can be sent to the FACP.
After receiving the alarm signal, the FACP will show the number and location of the MCP, and
sound alarm.
3.3.3 Sounder Strobes
Sounder strobe is a kind of audible/ visual alarm device installed in the protected area, which
can be activated by the FACP at the fire control center or by manual call points. A series of
GST addressable sounder strobes can be connected to the loop of GST100. After activated,
it will generate strong audible/ visual alarm signal.
3.3.4 Loop Isolator
Loop Isolator can remove the shorted part of loop from the whole system to ensure normal
operation of other devices and to ascertain the location of the part in fault. After the faulty part
is repaired, the loop isolator can automatically reset the removed part into the system.
3.3.5 Repeater Panel
GST852RP and GST8903 Repeater Panel can be connected with the FACP via 485 network
card. When one or more detectors alarm fire, the repeater panel can display the location and
alarm message of the detectors with audible and visual signals. Through communication loop,
it can be connected with FACP, disposing and displaying the data from the FACP.
Summary of Contents for GST100
Page 1: ......