GST100 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 20
Chapter 6 Users
’ Guide
6.1 Rules for Menu Operation
There are two methods to access the menu:
(1) Pressing the corresponding number on the keypad.
(2) Pressing the up and down key to highlight the menu item, and then press
Enter
.
6.2 Rules for Data Input
There is a cursor on the screen at the position to input data. Pressing the left and right key can
move the position of the cursor. If there are multiple sections, pressing the up and down key
can move the cursor among sections. You can also modify the data by moving the cursor
during data input. Wherever the cursor is, pressing
Enter
will save all input data, and
pressing
Cancel
will exit without saving any data.
6.3 Viewing Messages
The LCD will display the history records as shown in Fig. 6-1 after pressing
History
key. The
system provides two methods to view history records.
(1) All History is used to view the latest 500 system running messages including startup,
shutdown, reset, fire alarm, pre-alarm, supervisory, action, delay, fault and disabled
messages. The maximum capacity is 500 entries.
(2) Fire History is used to view the latest 999 fire messages. The maximum capacity is
999 entries.
2.Fire History
1.All History
Fig. 6-1
6.3.1 Viewing All Messages
In the screen shown in Fig. 6-1, selecting
“1. All History”, the system will enter the screen of
viewing history records.
In this screen, the latest 500 events can be viewed, which include event type, serial number,
total number, location, time and device type (Fig. 6-2).
Summary of Contents for GST100
Page 1: ......