GST100 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
Page 27
(1) Disabled: No message will be printed out.
(2) Print Fire: Only fire alarm messages will be printed out.
(3) Print All: All messages will be printed out.
Selecting
“1. Printer Setup” in the screen of Fig. 6-8, will enter the screen for setting the printer
as in Fig. 6-17.
The first screen
Disabled [*]
Print Fire[ ]
The second screen
Print All [ ]
Fig. 6-17
[*]
represents the mode is enabled, and [ ] represents it is disabled.
Highlighting a mode and pressing
Enter
, the mode will be enabled and
“
[*]
” will be displayed.
6.6.2 Time Setup
Time setup is used for setting and calibrating system time, which can be detailed to year,
month, date, hour and minute.
Note: The time must be set accurately as it will be used as reference time for system
running records.
Selecting
“2. Time Setup” in the screen of Fig. 6-8 will enter time setup screen as shown in Fig.
6-18.
DD-MM/YY HH:MM
- /
:
Fig. 6-18
The screen display the time by date-month/year hour: minute (DD: date, MM: month, YY: year,
HH: hour, MM: minute).
The control panel will return to the previous window after new time is entered. If the time
entered is incorrect, the system doesn
’t respond and waits for new input.
Summary of Contents for GST100
Page 1: ......