Geophysical Survey Systems, Inc.
PaveScan® RDM 2.0
Manual
MN36-716 Rev A
35
Press this button to automatically generate the calibration equation relating the
desired physical property to dielectrics. A screen is displayed to enter in the core-
measured values and corresponding dielectric values.
1
In the screen that appears enter in the dielectrics and corresponding core-measured physical property
(i.e. % Voids, %Compaction, Density) from up to 10 cores and then press the
button.
2
The calculated values are returned in a pop-up screen that prompts the user to either save the values
by pressing
OK
, or not to save the values by pressing
Cancel
.
3
By selecting
OK
, the values are input into the “A” and “B” entries in the Core Calibration screen
when the
button is pressed. To save these values with the project, press the
button.
These values are used to calculate the physical property (i.e. %voids, compaction or density) from the
Summary of Contents for PaveScan RDM 2.0
