Geophysical Survey Systems, Inc.
PaveScan® RDM 2.0
Manual
MN36-716 Rev A
9
There are numerous export options that provide extensive customization to
exported files and project statistics. These are described below.
Export Options Screen
Measurement Type:
The measurement value to export. Dielectric is the default. This value is always
exported. Additional options are: Percent Voids, Percent Compaction and Density. For measurement
types other than dielectric, the core calibration information must be entered for the project (see Core
Calibration). If no core calibration information is available, zeros are exported in the measurement value
column.
Distance File Moving Average:
When this value is non-zero, a central moving average of the size
specified is applied to each data point prior to export. For example, if a 0.5ft (20cm) moving average is
specified, each exported data point is an average of all the data points at the measurement location
± 0.25ft (± 10cm).
Distance File Measurement Interval:
The output interval between exported measurements. For
general purposes where data may be obtained over a distance of hundreds of feet, an export interval of
0.5ft (20cm) is useful.
Time File Moving Average:
When this value is non-zero, a central moving average of the time
specified is applied to each data point prior to export. The units are in seconds.
Time File Measurement Interval:
The output time interval between exported measurements. The units
are in seconds.
Export Defects:
Linear and 2-dimensional defect locations are exported to separate files when this box
is checked. See Appendix E for details.
Provide Segment Statistics:
Check this selection box to provide statistics over specified distance
intervals. For example, exported statistics can be calculated for each station interval. The exported
statistics appear in the individual file segment statistics and the Selected Range statistics files.
Summary of Contents for PaveScan RDM 2.0
