20
MEMORY FUNCTION
The device has two memory
areas and . Up to 50
separate measurements can be
saved in either area. Set the
Memory area key
to
memory area 1 or memory
area 2 before saving or
recalling measurements.
So up to 100 measurements
can be saved in both areas
altogether.
The values (blood pressure
and pulse rate) can be saved
in the memory of the unit,
together with the time and date. Just press the
Memory key
[MEMO] while the values are shown on the LCD. The memory
sign appears and the values will be written in the memory. The
LCD will go blank.
To read memory values, press the
Recall key
[RECAL]. The
memory values will be shown on the LCD, together with the
time and date. The last measurement will be shown first. Every
new press of the
Recall key
[RECAL] polling calls one prior
value pair.
The data in the memory is protected when power to
the unit is switched off.
The data in the memory is erased when the
batteries are replaced.
note 1:
note 2:
1.
2.
3.
1
2
1
2
Digimed 2x50 GB_Belgien 11.07.2003 11:40 Uhr Seite 20
