2. Setting the timer
a)
Switch unit on using the
On /
Off key
(Power).
b)
To enter the timer mode, press
the
TIMER key
longer than
3 seconds. The year number
flashes.
c)
To increase the flashing digit,
press the
key
;
to decrease, press the
RE-
CALL/ - key.
d)
Press the
TIMER key
. The
month flashes. Set the month
as described above.
e)
Press the
TIMER key
. The
day flashes. Set the day as
described above.
f)
Press the
TIMER key
. The
hour flashes. Set the hour as
described above.
g)
Press the
TIMER key
. The
minute flashes. Set the minute
as described above.
h)
To leave the timer mode, press
the
TIMER key
again.
Note:
If no key is pressed for 10 seconds, the next digit starts flashing
The unit will enter the standard mode after running through all
digits.
12
Digimed 2x50 GB_Belgien 11.07.2003 11:40 Uhr Seite 12
