GSi Protek 1000 Series, User Manual

Page: 53 / 73

0
RMS The Root Mean Square voltage over the entire waveform
Preshoot
Positive Overshoot = (Max - Top)/Amp x 100 %
Measured over the entire waveform
Overshoot
Negative Overshoot = (Base - Min)/Amp x 100 %
-Measured over the entire waveform
The Time Measurement menu
Menu Description
Period
Time to take for the first signal cycle to complete in the waveform
Frequency
Reciprocal of the period of the first cycle in the waveform
Rise time
Time taken from lower threshold to upper threshold
Fall time
Time taken from upper threshold to lower threshold
+Width
Measured of the first positive pulse in the waveform
-Width
Measured of the first Negative pulse in the waveform
+Duty
Positive Duty Cycle = (Positive Pulse Width)/Period x 100%
Measured of the first cycle in waveform
-Duty
Negative Duty Cycle = (Negative Pulse Width)/Period x 100%
Measured of the first cycle in waveform
NOTE:
The results of the automatic measurements will be displayed on the bottom of
the screen. Maximum 3 results could be displayed at the same time. When there is no
room, the next new measurement result will make the previous results moving left out of
screen.
1000MENUAL.indd 50 2009-04-06 �� 9:07:19