GSi Protek 1000 Series, User Manual

Page: 37 / 73

Sweep
Auto
Normal
Singl
Acquire waveform even no trigger occurred.
Acquire waveform when trigger occurred.
When trigger occurs, acquire one waveform then stop.
HF
Reject
ON
OFF
Reject high frequency signals.
Pulse Trigger Setting
Pulse trigger occurs according to the width of pulse. The abnormal signals can be
detected through setting up the pulse width condition.
Press
TRIG → F1 → Pulse
button to show the pulse trigger menu as the following
table.
The Pulse Trigger Menu (Page 1/2)
Figure 2-22
The Pulse Trigger Menu (Page 2/2)
Figure 2-23
The Pulse Trigger Table (Page 1/2)
Menu Setting Description
Source
CH1
CH2
Define CH1 or CH2 as trigger signal
When
+more
+Less
+Equal
-more
-Less
-Equal
+Pulse width more than
+Pulse width less than
+Pulse width equal to
-Pulse width more than
-Pulse width less than
-Pulse width equal toTo select pulse condition.
Setting Value Set required pulse width.
1/2
The Pulse Trigger Table (Page 2/2)
Menu Setting Description
2/2
1000MENUAL.indd 34 2009-04-06 �� 9:07:15