GSi Protek 1000 Series, User Manual

Page: 21 / 73

CHAPTER 2: Operating Scope
The end-user should know how to determine the system setup from the status bar of a
Protek1000 series scope meter. This chapter will show the detailed function of the test
tool.
■
Set Vertical System
■
Set Horizontal System
■
Set Trigger System
■
Save and Recall waveforms and setups
■
Utility Function
■
Measure Signal
■
Cursor Measure
Set Vertical System
Each channel of Protek1000 series scope meter has its own independent operation
menu and it will pop up after pressing
CH1
or
CH2
button. The settings of all items in
the menu are shown in the table below.
To make vertical CH1 and CH2 settings, do the following:
1.Press the
CH1
or
CH2
button and the function menu appears at the bottom of the
screen.
2. Select and press key from
F1
through
F4
keys to make different settings.
Now, you can find the menu that looks like the following figure 2-1.
The CH1 Menu (Page 1/2)
The CH1 Menu (Page 2/2)
Figure 2-1
The CH1 Menu
1000MENUAL.indd 18 2009-04-06 �� 9:06:59