GSi Protek 1000 Series, User Manual

Page: 22 / 73

The following table describes the channel menu:
Menu Setting Description
Enable
ON
OFF
Turn on Channel
Turn off Channel
Coupling
AC
DC
GND
The dc component in the input signal is blocked
The ac and dc components of the input signal are allowed
Disconnect the input signal.
Probe
1X
10X
100X
1000X
Select one according to the probe attenuation factor to
ensure correct vertical scale reading
Reset
Set the vertical display position back to 0
1/2
Go to the next menu page
2/2
Back to the previous menu page
Invert
ON
OFF
Turn on the invert function.
Turn off the invert function
BW Limit
ON
OFF
Turn on the BW Limit
Turn off the BW Limit
1. Change Volt/DIV
It is the default setting of Volts/Div in a 1-2-5-step sequence from 10mV/div, 20mV/div,
50mV/div, to 5 V/div or 10V/div.
The
Volt/DIV
will be displayed in the status bar on the bottom of the screen.
Figure 2-2
Channel Volt/DIV
1000MENUAL.indd 19 2009-04-06 �� 9:06:59