GSi Protek 1000 Series, User Manual

Page: 52 / 73

Signal Measurement
Press the
MEAS
button to display the menu of the automatic measurements settings.
The measure menu
Figure 2-45
The Measure menu
The oscilloscopes provide 18 auto measurements: Vpp, Vmax, Vmin, Vtop,
Vbase,Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time,
+Width, -Width, +Duty, -Duty (10 voltage and 8 timing measurements).
The Measure menu
Menu Setting Description
Source
CH1
CH2
Select CH1 or CH2 as source
channel for measurement.
Type
Voltage
Time
Select to measure voltage
parameter.
Meas All
ON
OFF
Turn on all measurement result.
Turn off al measurement result.
Clear
Clear measurement result on screen.
The Voltage Measurement menu
Menu Description
Pk to Pk
Peak-to-peak = Max - Min
Measured over the entire waveform
Maximum
Voltage of the absolute maximum level
Measured over the entire waveform
Minimum
Voltage of the absolute minimum level
Measured over the entire waveform
Top
Voltage of the statistical maximum level
Measured over the entire waveform
Base
Voltage of the statistical minimum level
Measured over the entire waveform
Amplitude
Amp = Base - Top
Measured over the entire waveform
Average The arithmetic mean over the entire waveform
1000MENUAL.indd 49 2009-04-06 �� 9:07:19