GSi Protek 1000 Series, User Manual

Page: 20 / 73

1. Press the
MENU ON/OFF
key to display the Function Menu on the bottom of the
screen and the corresponding optional settings on the bottom. Press
MENU ON/OFF
again to hide the Function Menu.
2. Choose one key from
F1
to
F5
and press it to change function setting.
To set up the vertical system
1. Change the vertical setup and notice that each change affects the
status bar differently.
■
Change the vertical sensitivity with or button and notice the change in the
status bar.
2. Move the signal vertically.
■
The / button moves the signal vertically. Also notice that the channel symbol
on the left side of the display moves in conjunction with the button.
To set up the horizontal system
1. Change the time base.
■
The or button changes the time base in a 1-2-5 step sequence, and displays
thevalue in the status bar.
2. Move signal horizontally.
■
The or button moves displayed signal horizontally on waveform window. It sets
the trigger point position.
To set up the trigger system
1. Change the trigger Level
■
The or button changes the trigger level. The trigger level value is displayed at
the top-right of the screen and a line is displayed showing the location of the trigger
level.
2. Change the trigger setup and notice these changes in the status bar.
■
Press TRIG button in the key panel.
Choose one key from F1 to F5 and press it to change function setting.
3. Press 50%
The
50%
button sets the trigger level to the center of the signal.
1000MENUAL.indd 17 2009-04-06 �� 9:06:58