3. Attach the first auger section to the U-joint shaft (35). Making sure that the Dura-Edge® side of the
flight (43) faces the center of the bin. Secure it with bolts (36) and lock nuts (37).
Figure 3-35
Attaching the auger to the U-joint
35
U-Joint
37
1/2 in. lock nut
36
1/2 x 3 in. bolt
43
Flight
4. Attach the pivot bracket (50) to the side of the gearbox using flange bolts (44) and flat washers (45).
NOTE:
Do not tighten the bolts.
Figure 3-36
Attaching the pivot bracket to the gearbox
44
1/2 x 1-1/4 in. flange bolt
50
Pivot bracket
45
1/2 in. flat washer
42
PNEG-2108
8" and 10" Standard Duty and IW Standard Duty
