4. Attach the two clutch control rods (21 and 22) with a control rod coupler (67) using the HHTB bolts
(25) and nylock nuts (66) as shown.
NOTE:
The connecting rod coupler is used for sweeps in 42′ diameter bins and larger.
Figure 3-24
Assembling the two clutch control rods
21
Control rod extension
66
5/16 in. nylock nut
22
Clutch control rod
67
Control rod coupling
25
5/16 x 1-3/4 in. HHTB bolt
5. Attach the clutch handle (30) to pivot bracket (29) using HHCS bolt (26) and nylock nut (85).
NOTE:
Do not over tighten. Handle must pivot freely.
Figure 3-25
Attaching the clutch handle to pivot bracket
26
3/8 x 1 in. HHCS bolt
30
Clutch handle
29
Clutch handle pivot bracket
85
3/8 in. nylock nut
36
PNEG-2108
8" and 10" Standard Duty and IW Standard Duty
