E32.0.02.6C-04
Manual for connection and operation of the
GIA 2000 / AAG and GIR 2002 / AAG
page 27 of 30
Err.4:
Values below display range
Indicates that display value is below the valid display range of the device (-1999 digit).
Possible causes:
- Incorrect scale.
- Counter underflow.
Remedies:
- The error-message will be reset if the display value is above -1999.
- Reset the counter
- When happening frequently, check the scale-setting, maybe it was set too
low and should be increased.
Err.7:
System-error
The device features an integrated self-diagnostic-function which checks essential parts of the de-
vice permanently. When detecting a failure, error-message Err.7 will be displayed.
Possible causes:
- Valid operating temperature has exceeded o has fallen below the valid
temperature range.
- Device defective.
Remedies:
- Stay within valid temperature range.
- Exchange the defective device.
Err.9:
Sensor defective
The device features an integrated diagnostic-function for the connected sensor or transmitter.
When detecting a failure, error-message Err.9 will be displayed.
Possible causes:
- Sensor broken or shorted (Pt100 or Pt1000).
- Sensor broken (thermo-elements).
Remedies:
- Check sensor or exchange defective sensor.
Er.11:
Value could not be calculated
Indicates a measuring value, needed for calculation of the display value, is faulty or out of range.
Possible causes:
- Incorrect scale.
Remedies:
- Check settings and input signal.
Er.12:
Invalid value, incorrect configuration
Indicates that the configuration of the device has been done incorrectly and that it has not been
possible to calculate a valid display.
Possible causes:
- Incorrect configuration of the device.
Remedies:
- Check configuration of device.
cccc:
Incomplete input configuration
Indicates that the configuration of the measuring input has not been done completely.
Possible causes:
- Configuration of the measuring input incomplete.
Remedies:
- Configurate the measuring input completely.
