Gree R410A Service Manual Download Page 132

Page: 132 / 217

Super Free Match

Service Manual

MAINTENANCE

128

①

Long press “Fuc” key for more than 2s to enter the

first-level menu. The first-level menu includes

control unit and display unit.

Press “Enter” key to enter the second-level menu.

Press “Fuc” key to switch the menu.

Press “Back” key to the previous menu.

②

Control unit operation:

When entering into the control unit:

The f

unction section flashes the running code and the data section display the current value uninterrupted.

Set parameters:

Press “Enter” key to enter the second-level menu, and set parameters with the

“

＋

” “

－

” keys. Now the

function section displays the running code uninterrupted and the data section flashes the set parameters.

Finish setting:

After press “Enter” key to the end, the

function section will display the running code uninterrupted and the

data section

display the set parameters uninterrupted.

Back:

Press “Back” key to the previous menu, and long press the “Back” key to exit the operation.

③

Display unit operation:

When entering into the display unit:

The function section display running code uninterrupted and the data section display the current value

uninterrupted.

“

＋

” “

－

”

Keys are invalid in the operation.

④

If no operation is performed within 1min, it will automatically return to the normal display.

1.3.3 For example

Set

condensation temperature

①

Long press “Fuc” key for more than 2s to enter the first-level menu:

the f

unction section flashes “CU”

code and the data section is blank.

②

Press “Enter” key to enter the second-level menu: the function section flashes “AE” code

and the data

section display the current

parameters

③

Switch with the “Fuc” key to set condensation temperature: the function section flashes “AC” code

and

the data section display the current

parameters

④

Press “Enter” key: the function section display “AC” code

uninterrupted

and the data section flashes the

current

parameters

⑤

Switch with the “

＋

” “

－

” to the target value, and then press “Enter” key: the function section display

“AC” code

uninterrupted

and the data section flashes the new

parameters uninterrupted

1.3.4 The meaning of running code

Summary of Contents for R410A


























































































































































































































Search results

Summary of Contents for R410A

Reviews:

Gree R410A, Service Manual, Page: 132 / 217

Search results

Summary of Contents for R410A

Reviews: