Gree GKH(12)BA-K3DNA1A/I, Service Manual

Page: 56 / 207

Super Free Match
Service Manual
CONTROL
52
" " on indoor unit is ON (green indicator. Color may be different for different models) and indoor unit gives out
a sound.
2) MODE
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly.
‹ After selecting auto mode, air conditioner will operate automatically according to ambient temperature.
Set temperature can’t be adjusted and also can’t be displayed. Press "FAN" button can adjust fan speed.
Press " " button and " " button can adjust swing angle.
‹ After selecting cool mode, air conditioner operates under cool mode. Cool indicator " " on indoor
unit is ON. You can press "
＋
" or "
－
" button to adjust set temperature. Press "FAN" button can adjust
fan speed. Press " " button and " " button can adjust swing angle.
‹ After selecting dry mode, air conditioner operates under dry mode at low speed. Dry indicator " " on
indoor unit is ON. Under dry mode, fan speed can’t be adjusted. Press " " button and " " button
to adjust swing angle.
‹ After selecting fan mode, air conditioner operates only under fan mode, All mode indicators on indoor
unit is OFF. Press "FAN" button can adjust fan speed. Press " " button and " " button to adjust
swing angle.
‹ After selecting heat mode, air conditioner operates under heat mode. Heat indicator " " on indoor
unit is ON. You can press "
＋
" or "
－
" button to adjust set temperature. Press "FAN" button to adjust
fan speed. Press " " button and " " button to adjust swing angle. (Cooling only unit can’t receive
the signal for heating mode.)
Note:
For preventing cold wind, after starting up heating mode, indoor fan will blow fan afterdelaying 1-5min.
(Details time is decided by indoor ambient temperature) Temperature setting range on remote controller:
16
℃
-30
℃
. Fan speed setting range: auto, low speed, medium speed and high speed.
3)
“
＋
” or “
－
”
‹ After each pressing of "
＋
" or "
－
" button, it can increase or decrease set temperature 1 . Hold
℃
"
＋
" or "
－
"
button, 2s later, set temperature on remote controller will change quickly. After reaching to your required
time, loosen the button. Temperature indicator on indoor unit will also change accordingly. (Temperature
can’t be adjusted under auto mode)
‹ Under TIMER ON, TIMER OFF or Clock setting, you can press "
＋
" or "
－
" button to adjust time. (Refer to
TIMER button for details)
4)
FAN
Press this button, Auto, Low, Medium, High speed can be circularly selected.