GREAT PLAINS PL5200, Operator'S Manual

Page: 97 / 110

PL5200 Planter Table of Contents Index Pre-Delivery Instructions
Great Plains | 411-825M | 12/07/2020 90
Pre-Delivery Instructions
This section covers instructions exclusively for the
dealer to assembly and produce a properly working
machine for the customer. All workers must read
and understand this entire manual before beginning
assembly and setup.
Illustrations in this section were not done during an
actual assembly. For clarity, some illustrations may
or may not include parts, assemblies, and other
components at the same point in an actual
assembly.
Ensure you have all the necessary tools and
equipment before beginning assembly. Ensure the
heavy machinery has the proper ratings for tasks.
As the assembly steps are completed, ensure
removed items or items set aside a safe distance
away from and will continue to allow for adequate
space to safely complete assembly.
It is the dealer’s responsibility to unload the PL5200
planter. Unload all equipment before beginning
assembly. Do not attempt any work with the
PL5200 while on the truck.
It is the dealer’s responsibility to ensure any workers or
others in close proximity of the planter are familiar and
understand the contents of this manual, and are properly
trained to work, assembly, operate, and perform
maintenance on the planter and the other machinery
used to assemble the PL5200 planter.
Crushing and Pinching Hazards
A falling section or part can cause severe injury or
death by crushing. Always keep body and body
parts out from under any parts or components of
the planter. Ensure all equipment is properly rated
for the load before attempting to unload or move
parts, or assembly the planter. Ensure all
equipment operates with smooth movements.
Secure Load
Obey all safety instructions from hoist and/or lifting
equipment manufacturer. Be sure hoist chains
and lift straps are properly rated for load and
securely attached to planter part before moving or
unloading parts.
Lift Failure Hazard
Do not lift on the wings. There is a significant risk of
hinge failure and lift collapse; either will result in
major planter and lift equipment damage, serious
injury, and even death.

Requirement Checklist

Read and understand “ Safety Information ” on
page 2 before beginning to assemble the planter.

Have at least three people on hand while assembling.

Appoint a designated observer and have a plan to
safely complete assembly

Ensure the assembly location is level and free of
obstructions and debris. Great Plains recommends an
open, concrete area.

Have all major components and required tools. Test to
ensure they are properly working.

Account for all loose components, fasteners, and pins
shipped with the PL5200 planter.

Use a tractor of sufficient size and horsepower with at
least
three hydraulic circuits. Refer to
“ Specifications ” on page 80 for tractor requirements.

Ensure safety decals and reflectors are located
correctly and legible. Replace if improperly located or
damaged. Refer to “
Safety Decals ” on page 6.

Have a copy of the parts manual on hand for
reference. If unsure of proper placement or use of any
part or fastener, refer to the parts manual.

Ensure all moving parts are moving freely, bolts are
tighten to torque, and cotter pins are spread.

Check for proper tension and alignment on all drive
chains.

Inflate tires to recommended pressure as listed on
“
Tire Chart ” on page 82.

Tighten wheel bolts to torque as specified on “ Torque
Value Chart ” on page 82.
Tools Required
 Industrial lift rated for 30,000 lbs (14,000 kg) or greater
with a 3-point hitch attachment.
 Industrial lift or hoist system rated for 1,000 lbs (XX kg)
or greater
 PL5200 Planter parts manual (411-825P.)
 General hand tools.
 Ladder.
 Jack stands or blocks.
 Hoist straps with proper load rating.
 Suitable tractor with a 3-point hitch. See
“
Specifications
” on page 80.
 At least three workers or more to assist.
Location Selection
The planter will need to be unloaded at the spot
where the final assembly will take place.
!
!
!