
1
2
3
4
5
6
7
*
P1
P2
P3
P4
F
Installation of the spotlights (F) (not included): Same procedure for the two spotlights. Follow
instructions attached to the spotlights. Install the part (P1) with the adhesive seal and thread
it with P2. Install the liner, the other adhesive seal and screw in P3.
Carefully cut the liner of the die hole for passing the cable. Install P4. Place P5 on the rear
part of P1 (before gluing) and pass the spotlight cable through the P5 hole and the cable gland.
Glue P5 with the rear part of P1.
Position the spotlight by making a half-turn.
NOTE: If you wish to acquire spotlights, please contact your distributor and ask for references
PLREB and PLREC.
In order to change the lamp you should leave a little roll of cable inside. If you do not do this,
the gland could block it and you will not be able to change the lamp in the future.
P5
PEOV9159 - PEOV8059 - PEOV7059 - PEOV6059 - PEOV5059 - PE5559 - PE4259 - PE3559
PEOV9127 - PEOV8027 - PEOV7027 - PEOV6027 - PEOV5027 - PE5527 - PE4227 - PE3527
DK
Installation af lamper (F) (medfølger ikke): Samme procedure for begge lamper. Følg anvisnin-
gerne, der følger med lamperne. Installer delen (P1) med selvklæbende pakning, og skru
sammen med P2. Installer dugen og den anden selvklæbende pakning, og skru det i P3.
Skær forsigtigt dugen ud af hullet, som kablet skal føres igennem. Installer P4. Anbring P5 på
den bageste del af P1 (før der limes), og før lampekablet gennem P5-hullet og kabelforskruningen.
Lim P5 på den bageste del af P1.
Anbring lampen ved at dreje den en halv omgang.
BEMÆRK: Hvis du ønsker at anskaffe dig lamper, skal du kontakte din forhandler og henvise til
referencerne PLREB og PLREC.
For at kunne udskifte lampen bør du efterlade lidt oprullet kabel indvendigt. Hvis du ikke gør det,
kan kabelforskruningen blokere det, så du ikke kan udskifte lampen i fremtiden.
*
EXTERIOR
UDVENDIGT
ULKOPUOLI
UTSIDE
EXTERIÖR
2
INTERIOR
INDVENDIGT
SISÄPUOLI
INNSIDE
INTERIÖR
1-3-4-5-6-7